Full metadata record

DC Field Value Language
dc.contributor.authorLee, Chil-Hyoung-
dc.contributor.authorChoi, Doo-Jin-
dc.contributor.authorOh, Young-Jei-
dc.date.accessioned2024-01-20T12:32:00Z-
dc.date.available2024-01-20T12:32:00Z-
dc.date.created2021-09-04-
dc.date.issued2013-05-
dc.identifier.issn1738-8090-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/128128-
dc.description.abstractThis paper reports the properties of p-type oxide semiconductor Sn1-x Mn (x) O-2 (MTO) nanoparticles with a low doping concentration of Mn (0 a parts per thousand currency sign x a parts per thousand currency sign 0.05) prepared with a sol-gel method. X-ray diffraction (XRD) results show that single-phase rutile MTO was obtained for x up to 0.03. The samples have particle average size of about 100 nm, which was confirmed with scanning electron microscopy (SEM) and high-resolution transmission electron microscopy (HRTEM). The compositional changes and electrical properties of the MTO nanoparticles were characterized by using x-ray photoelectron spectroscopy (XPS) and Hall effect measurements. Mn3+ cations are incorporated into the rutile SnO2 lattice. P-type conduction which is arisen from the substitution of Mn3+ to Sn4+ lattice was demonstrate by Hall data. These compositions have hole carrier concentrations in the range 2.268.53 x 10(16) cm(-3) and exhibit Hall mobilities in the range 0.84.1 cm(2)/Vs. The mobility of MTO decreases as the Mn content increases due to the doping effect. A transparent, ptype TFT device can be fabricated with this composition.-
dc.languageEnglish-
dc.publisherKOREAN INST METALS MATERIALS-
dc.subjectDOPED SNO2-
dc.subjectTIN OXIDE-
dc.subjectTEMPERATURE FERROMAGNETISM-
dc.subjectTHIN-
dc.subjectMECHANISM-
dc.titleCharacterization of the p-type Sn1-x Mn (x) O-2 oxide semiconductor nanoparticles by Sol-Gel method-
dc.typeArticle-
dc.identifier.doi10.1007/s13391-012-2140-9-
dc.description.journalClass1-
dc.identifier.bibliographicCitationELECTRONIC MATERIALS LETTERS, v.9, no.3, pp.283 - 286-
dc.citation.titleELECTRONIC MATERIALS LETTERS-
dc.citation.volume9-
dc.citation.number3-
dc.citation.startPage283-
dc.citation.endPage286-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.description.journalRegisteredClasskci-
dc.description.journalRegisteredClassother-
dc.identifier.kciidART001769159-
dc.identifier.wosid000319038700006-
dc.identifier.scopusid2-s2.0-84878065540-
dc.relation.journalWebOfScienceCategoryMaterials Science, Multidisciplinary-
dc.relation.journalResearchAreaMaterials Science-
dc.type.docTypeArticle-
dc.subject.keywordPlusDOPED SNO2-
dc.subject.keywordPlusTIN OXIDE-
dc.subject.keywordPlusTEMPERATURE FERROMAGNETISM-
dc.subject.keywordPlusTHIN-
dc.subject.keywordPlusMECHANISM-
dc.subject.keywordAuthoroxide semiconductor-
dc.subject.keywordAuthornanoparticle-
dc.subject.keywordAuthorSn1-xMnxO2-
dc.subject.keywordAuthorp-type-
dc.subject.keywordAuthormobility-
Appears in Collections:
KIST Article > 2013
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE