Fabrication of carbon nanofiber reinforced aluminum alloy nanocomposites by a liquid process

Authors
Oh, Se-IlLim, Jun-YoungKim, Yu-ChanYoon, JuilKim, Gyeung-HoLee, JoonhoSung, Yun-MoHan, Jun-Hyun
Issue Date
2012-11-25
Publisher
ELSEVIER SCIENCE SA
Citation
JOURNAL OF ALLOYS AND COMPOUNDS, v.542, pp.111 - 117
Abstract
Carbon nanofiber (CNF) reinforced aluminum alloy nanocomposites were fabricated by a liquid process. In order to enhance the wettability of Al on CNFs and the dispersion of CNFs in the Al melt, and suppress the formation of the brittle Al4C3 phase, Cu was coated on CNFs using electroless plating. CNFs were also vibration-milled to enhance the dispersion of the CNFs by reducing the aspect ratio of the CNFs. The Cu-coated CNFs could be easily accommodated into the Al melt by using button-shaped feedstocks that were made of CNFs and Al powder. The concentration of CNFs in the CNF/Al nanocomposites was varied from 0.065 to 0.58 wt.%. Our results indicate that CNF/Al nanocomposites with significantly improved mechanical properties could be fabricated by a liquid process and that CNFs acted as an effective reinforcement material. (C) 2012 Elsevier B. V. All rights reserved.
Keywords
MECHANICAL-PROPERTIES; INTERFACE; COMPOSITES; FIBERS; NANOTUBES; AL; MECHANICAL-PROPERTIES; INTERFACE; COMPOSITES; FIBERS; NANOTUBES; AL; Metal-matrix composites (MMCs); Carbon nanofiber; Casting; Wettability; Mechanical properties
ISSN
0925-8388
URI
https://pubs.kist.re.kr/handle/201004/128641
DOI
10.1016/j.jallcom.2012.07.029
Appears in Collections:
KIST Article > 2012
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE