Full metadata record

DC Field Value Language
dc.contributor.authorKim, Tae Ho-
dc.contributor.authorSan Andres, Luis-
dc.date.accessioned2024-01-20T20:03:03Z-
dc.date.available2024-01-20T20:03:03Z-
dc.date.created2021-09-05-
dc.date.issued2010-01-
dc.identifier.issn0742-4787-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/131830-
dc.description.abstractAn engineered thermal management is fundamental to the application of gas foil bearings (GFBs) as turboshaft supports in rotorcraft propulsion systems. The paper presents a model for the thermal energy transport in a rotor-GFB system operating at high temperature with typical inner and/or outer cooling flows. Predicted film temperatures agree with published test data, demonstrating the effectiveness of an outer cooling stream to remove heat and to control the operating temperature. The inner flow stream is not as efficient. The analysis shows paths of thermal energy by conduction and convection to assist in the design and troubleshooting of rotor-GFB systems operating hot. Bearing temperatures and shaft motions measurements are obtained in a test rotor electrically heated to 132 degrees C. In speed-up tests to 26 krpm, the rotor motion amplitude drops suddenly just above the critical speed, thus, evidencing the typical hardening of compliant bearings. At the hottest test condition, since air is more viscous, the rotor peak motion amplitude decreases, not showing a jump. The coastdown tests show the critical speed increases slightly as the temperature increases. [DOI: 10.1115/1.4000279]-
dc.languageEnglish-
dc.publisherASME-
dc.subjectAIR JOURNAL BEARINGS-
dc.subjectSTIFFNESS-
dc.titleThermohydrodynamic Model Predictions and Performance Measurements of Bump-Type Foil Bearing for Oil-Free Turboshaft Engines in Rotorcraft Propulsion Systems-
dc.typeArticle-
dc.identifier.doi10.1115/1.4000279-
dc.description.journalClass1-
dc.identifier.bibliographicCitationJOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME, v.132, no.1-
dc.citation.titleJOURNAL OF TRIBOLOGY-TRANSACTIONS OF THE ASME-
dc.citation.volume132-
dc.citation.number1-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.identifier.wosid000272613400009-
dc.identifier.scopusid2-s2.0-77955264857-
dc.relation.journalWebOfScienceCategoryEngineering, Mechanical-
dc.relation.journalResearchAreaEngineering-
dc.type.docTypeArticle-
dc.subject.keywordPlusAIR JOURNAL BEARINGS-
dc.subject.keywordPlusSTIFFNESS-
dc.subject.keywordAuthorThermohydrodynamics-
dc.subject.keywordAuthorFoil Bearing-
dc.subject.keywordAuthorOil-Free Turboshaft Engines-
dc.subject.keywordAuthorRotorcraft Propulsion Systems-
dc.subject.keywordAuthorThermal energy Transport-
dc.subject.keywordAuthor*2009 개인평가에 반영되었음.(&apos-
dc.subject.keywordAuthor09.11.30 요청)-
Appears in Collections:
KIST Article > 2010
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE