Full metadata record

DC Field Value Language
dc.contributor.authorKim, SH-
dc.contributor.authorSeon, HW-
dc.contributor.authorKim, HT-
dc.contributor.authorPark, JG-
dc.contributor.authorKim, YH-
dc.contributor.authorByun, JD-
dc.date.accessioned2024-01-21T15:33:14Z-
dc.date.available2024-01-21T15:33:14Z-
dc.date.created2022-01-11-
dc.date.issued1999-05-31-
dc.identifier.issn0921-5107-
dc.identifier.urihttps://pubs.kist.re.kr/handle/201004/142182-
dc.description.abstractThe effect of MnO addition on the microstructure and electrical properties of Nb-doped SrTiO3 varistors was investigated by using scanning electron microscopy, I-V and C-V measurement, complex-capacitance plane analysis, and impedance spectroscopy. It was observed that the grain Size and dielectric constant of the ceramics decreased with increasing MnO content. The non-linearity coefficient defining varistor characteristics increased significantly from 5 to 43 as the MnO content increased from 0 to 0.03 mol%. The addition of MnO brought on changes in the gain boundary electronic states: as the MnO content increased, the potential barrier height and the breakdown voltage increased but the charge carrier concentration decreased. This behavior was explained through the effect of Mn ions substituting for Ti sites. The substitutional defect Mn'(Ti)' (or Mn'(Ti)), formed in both grain boundary region and grain interior, acts as an electron-trap. (C) 1999 Elsevier Science S.A. All rights reserved.-
dc.languageEnglish-
dc.publisherELSEVIER SCIENCE SA-
dc.subjectBOUNDARY-LAYER CAPACITORS-
dc.subjectZINC-OXIDE-
dc.subjectSTRONTIUM-TITANATE-
dc.subjectGRAIN-BOUNDARIES-
dc.subjectBARIUM-TITANATE-
dc.subjectZNO VARISTORS-
dc.subjectCERAMICS-
dc.subjectTEMPERATURE-
dc.subjectSEGREGATION-
dc.subjectACCEPTOR-
dc.titleEffect of MnO addition on the electrical properties of Nb-doped SrTiO3 varistor-
dc.typeArticle-
dc.identifier.doi10.1016/S0921-5107(98)00451-6-
dc.description.journalClass1-
dc.identifier.bibliographicCitationMATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY, v.60, no.1, pp.12 - 20-
dc.citation.titleMATERIALS SCIENCE AND ENGINEERING B-SOLID STATE MATERIALS FOR ADVANCED TECHNOLOGY-
dc.citation.volume60-
dc.citation.number1-
dc.citation.startPage12-
dc.citation.endPage20-
dc.description.journalRegisteredClassscie-
dc.description.journalRegisteredClassscopus-
dc.identifier.wosid000080739200002-
dc.identifier.scopusid2-s2.0-0032629565-
dc.relation.journalWebOfScienceCategoryMaterials Science, Multidisciplinary-
dc.relation.journalWebOfScienceCategoryPhysics, Condensed Matter-
dc.relation.journalResearchAreaMaterials Science-
dc.relation.journalResearchAreaPhysics-
dc.type.docTypeArticle-
dc.subject.keywordPlusBOUNDARY-LAYER CAPACITORS-
dc.subject.keywordPlusZINC-OXIDE-
dc.subject.keywordPlusSTRONTIUM-TITANATE-
dc.subject.keywordPlusGRAIN-BOUNDARIES-
dc.subject.keywordPlusBARIUM-TITANATE-
dc.subject.keywordPlusZNO VARISTORS-
dc.subject.keywordPlusCERAMICS-
dc.subject.keywordPlusTEMPERATURE-
dc.subject.keywordPlusSEGREGATION-
dc.subject.keywordPlusACCEPTOR-
dc.subject.keywordAuthorstrontium titanate-
dc.subject.keywordAuthorvaristor-
dc.subject.keywordAuthorgrain boundary potential barrier-
dc.subject.keywordAuthordonor concentration-
dc.subject.keywordAuthormicroelectrode-
Appears in Collections:
KIST Article > Others
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE