Polybenzimidazole Membrane for Vanadium Flow Battery Applications

Abstract

Polybenzimidazole membrane for vanadium flow battery applications K. Azizi,1* H.A. Hjuler,1 L.N. Cleemann,1 D. Henkensmeier,2 J. C. Duburg,3 and L. Gubler3 1) Blue World Technologies, Egeskovvej 6C, 3490 Kvistgaard, Denmark 2) Center for Hydrogen·Fuel Cell Research, Korea Institute of Science and Technology (KIST), Seoul 02792, Korea 3) Electrochemistry Laboratory, Paul Scherrer Institute, Forschungsstrasse 111, 5232 Villigen PSI, Switzerland *kaz@blue.world The vanadium redox flow battery (VRFB) is one of the most promising secondary batteries as a large-capacity energy storage device for storing renewable energy.1 Perfluorinated-based ion exchange membranes such as Nafion are the most widely used membranes in VRFB due to their high proton conductivity. However, the extremely high cost and low ion selectivity of Nafion have limited their further application in VRFB. Among the aromatic hydrocarbon-based membranes that combine both high ion selectivity and high proton conductivity, polybenzimidazole- based membranes have served as one of the most promising alternatives to Nafion due to their excellent chemical and mechanical stability and low cost.2 In the present work m-PBI membranes of varying thickness and modified PBI were prepared, and their properties and VRFB performances were compared. The voltage efficiency (VE) increased with decreasing membrane thickness because of the decreasing ohmic resistance. The excellent current efficiency (CE) of VRFBs using meta-PBI based membranes is attributed to the negligible vanadium crossover observed in ex-situ permeability tests. The stability of the membranes after long term cycling is one of the most challenging problems in large-scale VRB applications. The durability of PBI membrane in VRFB cell testing and the capacity decay was measured by operating the cells for 100 cycles under a high current density of 200 mA cm？2.

Fig 1: Flow battery efficiencies using electrodes: 2.5 mm SGL, CR = 20%, membrane: PBI 7 ？m at current density of 200 mA/cm2, the electrolyte solution V(IV):V(III) (50:50) in 2.0 M H2SO4 and 0.05 M H3PO4 . The chemical stability of PBI membranes was analyzed after immersion of the PBI samples in various highly oxidizing and reducing sulfuric acid based vanadium and cerium solutions. The membranes stayed unchanged for more than 4 months. This result suggests that the PBI membranes demonstrate excellent ex-situ chemical stability in the harsh acid, oxidizing and reducing conditions. References:

1) C. Noh, M. Jung, D. Henkensmeier, S. W. Nam and Y. Kwon, ACS Appl. Mater. Interfaces, 9 (2017) 36799-36809. 2) D. Chen, H. Qi, T. Sun, C. Yan, Y. He, C. Kang, Z. Yuan, X. Li, J. Membr. Sci., 586 (2019) 202-210.