| 2018-08-15 | Accelerated oxidation behavior of NbSi2 coating grown on Nb substrate at 600-900 degrees C | Yoon, Jin-Kook; Kim, Gyeung-Ho |
| 2007-03-25 | Analysis on the phase transition behavior of Cu base bulk metallic glass by electrical resistivity measurement | Ji, Young Su; Chung, Sung Jae; Ok, Myoung-Ryul; Hong, Kyung Tae; Suh, Jin-Yoo; Byeon, Jai Won; Yoon, Jin-Kook; Lee, Kyung Hwan; Lee, Kyung Sub |
| 2011-12 | Consolidation and mechanical properties of nanostructured (Mo,Ti)Si-2 from mechanically activated powder by high frequency induction heated sintering | Park, Na-Ra; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook; Shon, In-Jin |
| 2007-05-25 | Consolidation and mechanical properties of nanostructured 2MoSi(2)-SiC composite synthesized by high-frequency induction heated combustion | Kim, Dong-Ki; Shon, In-Jin; Ko, In-Yong; Yoon, Jin-Kook; Munir, Z. A. |
| 2010-09-03 | Consolidation and mechanical properties of nanostructured MoSi2 from mechanically reacted powder by high-frequency induction-heated sintering | Ko, In-Yong; Park, Jeong-Hwan; Yoon, Jin-Kook; Doh, Jung-Mann; Shon, In-Jin |
| 2011-01-25 | Consolidation and mechanical properties of nanostructured MoSi2-SiC-Si3N4 from mechanically activated powder by high frequency induction heated sintering | Shon, In-Jin; Lee, Dong-Mok; Doh, Jung-Mann; Yoon, Jin-Kook; Ko, In-Yong |
| 2011-02 | Consolidation of a nanostructured Al2O3 reinforced Fe-Cr composite by rapid sintering and its mechanical properties | Ko, In-Yong; Shon, In-Jin; Doh, Jung-Mann; Yoon, Jin-Kook; Park, Sang-Whan; Park, Na-Ra |
| 2011-02 | Consolidation of Binder less Nanostructured TiC by Pulsed Current Activated Sintering and Its Mechanical Properties | Shon, In-Jin; Kim, Byung-Ryang; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook |
| 2010-08 | Consolidation of binderless nanostructured titanium carbide by high-frequency induction heated sintering | Shon, In-Jin; Kim, Byung-Ryang; Doh, Jung-Mann; Yoon, Jin-Kook |
| 2006-12-21 | Consolidation of nanostructured NbSi2-SiC composite synthesized by high-frequency induction heated combustion | Park, Hyun-Kuk; Shon, In-Jin; Yoon, Jin-Kook; Hong, Kyung-Tae |
| 2009-07-01 | Consolidation of nanostructured ZrSi2-Si3N4 synthesized from mechanically activated (4ZrN+11Si) powders by high frequency induction heated combustion synthesis | Shon, In-Jin; Park, Jeong-Hwan; Yoon, Jin-Kook; Park, Hyun-Kuk |
| 2007-01 | Consolidation of ultra fine WC and WC-Co hard materials by pulsed current activated sintering and its mechanical properties | Kim, Hwan-Cheol; Shon, In-Jin; Yoon, Jin-Kook; Doh, Jung-Mann |
| 2010-11 | Effect of Al and Cr on Oxidation of Fe-Al and Fe-Cr Alloys | Kim, Tae-Wan; Jo, Seung-Hoon; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook; Shon, In-Jin |
| 2011-06 | Effect of Fe2O3 on properties and densification of 8YSZ by pulsed current activated sintering | Shon, In-Jin; Du, Song-Lee; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook; Park, Jeong-Hwan |
| 2012-08 | Effect of FeAl3 on properties of (W,Ti)C-FeAl3 hard materials consolidated by a pulsed current activated sintering method | Shon, In-Jin; Na, Kwon-Il; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook |
| 2013-03 | Effect of Milling on Properties and Consolidation of TiO2 by High-Frequency Induction Heated Sintering | Shon, In-Jin; Lee, Geon-Woo; Doh, Jung-Mann; Yoon, Jin-Kook |
| 2016-05-15 | Enhanced mechanical properties and consolidation of the ultra-fine WC-Al2O3 composites using pulsed current activated heating | Oh, Seung-Jin; Kim, Byung-Su; Yoon, Jin-Kook; Hong, Kyung-Tae; Shon, In-Jin |
| 2014-06-12 | Enhanced mechanical properties of a nanostructured Mg2Al4Si5O18-MgAl2O4 composite | Shon, In-Jin; Kang, Hyun-Su; Doh, Jung-Mann; Yoon, Jin-Kook |
| 2015-06 | Enhanced mechanical properties of nanostructured TiSi2-NbSi2 composite rapidly sintered by pulsed current activated heating | Kwak, Bong-Won; Kim, Byung-Su; Yoon, Jin-Kook; Hong, Kyung-Tae; Shon, In-Jin |
| 2018-01 | Enhanced properties of nanostructured TiO2-graphene composites by rapid sintering | Shon, In-Jin; Yoon, Jin-Kook; Hong, Kyung-Tae |
| 2011-07 | Fabrication and Mechanical Properties of Nanostructured Al2O3-MgSiO3-SiO2 Composites Synthesized by Pulsed Current Activated Combustion of Mechanically Activated Powder | Shon, In-Jin; Kang, Hyun-Su; Doh, Jung-Mann; Yoon, Jin-Kook |
| 2016-08 | Fabrication and Mechanical Properties of Nanostructured TiC-TiAl by the Pulsed Current Activated Sintering | Kwak, Bong-Won; Kim, Byung-Su; Yoon, Jin-Kook; Hong, Kyung-Tae; Shon, In-Jin |
| 2012-06 | Fabrication of Nanostructured 3FeAl-Al2O3 Composite from Mechanically Synthesized Powders by Pulsed Current Activated Sintering and Its Mechanical Properties | Du, Song-Lee; Shon, In-Jin; Doh, Jung-Mann; Park, Bang-Ju; Yoon, Jin-Kook |
| 2006-06 | Fabrication of ultrafine binderless WC and WC-Ni hard materials by a pulsed current activated sintering method | Kim, Hwan-Cheol; Shon, In-Jin; Ko, In-Yong; Yoon, Jin-Kook; Doh, Jung-Mann; Lee, Gyu-Won |
| 2011-05-12 | Fast consolidation of a nanocrystalline Al2O3 reinforced 3.7Fe(0.54)Cr(0.18)Al(0.26)Si(0.016) composite from mechanical synthesized powder through pulsed current activated heating | Shon, In-Jin; Jo, Seung-Hoon; Ko, In-Yong; Doh, Jung-Mann; Yoon, Jin-Kook; Park, Sang-Whan |
| 2011-06 | FAST LOW-TEMPERATURE CONSOLIDATION OF NANOCRYSTALLINE Fe-ZrO2 COMPOSITE BY HIGH-FREQUENCY INDUCTION-HEATED SINTERING | Shon, In-Jin; Kang, Hyun-Su; Ko, In-Yong; Yoon, Jin-Kook; Doh, Jung-Mann |
| 2007-03-25 | Formation of nitride film on amorphous ribbon using chemical vapor deposition | Han, Jun-Hyun; Kim, Tae-Hoon; Yoon, Jin-Kook; Jee, Kwang-Koo; Kim, Kwang-Yoon |
| 2008-03 | Growth behavior and microstructure of oxide scales grown on WSi2 coating | Kim, Han-Sung; Yoon, Jin-Kook; Kim, Gyeung-Ho; Doh, Jung-Mann; Kwun, Sook-In; Hong, Kyung-Tae |
| 2006-08-31 | Growth kinetics and oxidation behavior of WSi2 coating formed by chemical vapor deposition of Si on W substrate | Yoon, Jin-Kook; Lee, Kyung-Whan; Chung, Sung-Jae; Shon, In-Jin; Doh, Jung-Mann; Kim, Gyeung-Ho |
| 2017-12 | High temperature isothermal oxidation behavior of NbSi2 coating at 1000-1450 degrees C | Choi, Young-Jun; Yoon, Jin-Kook; Kim, Gyeung-Ho; Yoon, Woo-Young; Doh, Jung-Man; Hong, Kyung-Tae |
