Interfacial reaction and its influence on the mechanical properties of the ASZ short fibre-reinforced Al alloy composite

Authors
Lee, JCShim, JHSeok, HKLee, HI
Issue Date
2001-02
Publisher
BLACKWELL SCIENCE LTD
Citation
JOURNAL OF MICROSCOPY-OXFORD, v.201, pp.291 - 298
Abstract
The effect of interfacial reaction on the mechanical properties of the AC8A Al alloy reinforced with ASZ short fibres (ASZ/AC8A composite) was studied. In the ASZ/AC8A composite, the interfacial reaction was observed to proceed between the SiO2 binder layer and Mg of the matrix td form MgAl2O4 at the interface. Formation of MgAl2O4 was believed to enhance the interfacial bonding strength, resulting in the improved composite strength. However, the interfacial reaction in the ASZ/AC8A composite always took place at the expense of Mg in the matrix, resulting in the composite devoid of the Mg bearing precipitates such as Al2CuMg and Mg2Si. Interfacial reaction mechanisms were investigated for composites containing various Mg contents. The resultant mechanical properties of the composite were measured to determine the adequate amount of Mg within the composite. Microstructural changes of the composite were observed using transmission electron microscopy and differential scanning calorimetry to provide qualitative analyses on the experimental observations.
Keywords
PHASE-DIAGRAM; THERMODYNAMIC CALCULATION; SI SYSTEM; PHASE-DIAGRAM; THERMODYNAMIC CALCULATION; SI SYSTEM; composite pistons; interfacial reaction; MMCs
ISSN
0022-2720
URI
https://pubs.kist.re.kr/handle/201004/140753
DOI
10.1046/j.1365-2818.2001.00763.x
Appears in Collections:
KIST Article > 2001
Files in This Item:
There are no files associated with this item.
Export
RIS (EndNote)
XLS (Excel)
XML

qrcode

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

BROWSE