InGaAs layer effect on the growth of AlGaAs/GaAs quantum wires on V-grooved GaAs substrates
- Authors
- Kim, EK; Lee, MS; Kim, SI; Park, YJ; Min, SK; Lee, JY
- Issue Date
- 1997-06
- Publisher
- ELSEVIER SCIENCE BV
- Citation
- APPLIED SURFACE SCIENCE, v.117, pp.690 - 694
- Abstract
- We have studied an effect of InGaAs layer on the structural and optical properties of AlGaAs/GaAs quantum wires (QWRs) grown on V-grooved GaAs(100) substrates by metalorganic chemical vapor deposition. The In0.15Ga0.85As layer with thickness of 2-4 mu were prepared on GaAs(100) substrates, and the V-grooves were defined with 20 mu m intervals by photolithographic method. The quantum structures with five periods of 5 nm GaAs and 25 nm Al0.5Ga0.5As layers were grown on V-grooved InGaAs/GaAs substrates. From the scanning electron microscope and transmission electron microscope measurements, it appeared that the thick InGaAs layer caused to form several facets in the side walls of V-grooves. Especially, the side walls near the bottom were convexly shaped, resulting in narrowing the width near the bottom of the V-groove. In the photoluminescence (PL) spectra, QWRs grown on this substrate showed a blue shift, while any PL signal from the top-quantum wells on InGaAs layer has not appeared. From these results, it was suggested that the InGaAs layer plays an important role for the lateral tightening of QWRs.
- Keywords
- CHEMICAL-VAPOR-DEPOSITION; FABRICATION; LASERS; CCL4; quantum wire; InGaAs layer; V-grooved GaAs; MOCVD; TEM; PL
- ISSN
- 0169-4332
- URI
- https://pubs.kist.re.kr/handle/201004/143778
- Appears in Collections:
- KIST Article > Others
- Files in This Item:
There are no files associated with this item.
- Export
- RIS (EndNote)
- XLS (Excel)
- XML
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.