| 2005-02 | A role for the carbohydrate portion of ginsenoside Rg3 in Na+ channel inhibition | Kim, J.-H.; Hong, Y.-H.; Lee, J.-H.; Kim, D.-H.; Nam, G.; Jeong, S.M.; Lee, B.-H.; Lee, S.-M.; Nah, S.-Y. |
| 2014-08 | BaCeO3-BaZrO3 solid solution (BCZY) as a high performance electrolyte of protonic ceramic fuel cells (PCFCs) | An, H.; Shin, D.; Choi, S.M.; Lee, J.-H.; Son, J.-W.; Kim, B.-K.; Je, H.J.; Lee, H.-W.; Yoon, K.J. |
| 2008-04 | Catalytic characteristics of perovskite-type oxides under mixed methane and oxygen gases | Ahn, K.; Kim, H.; Chung, Y.-C.; Son, J.-W.; Lee, H.W.; Lee, J.-H. |
| 2005-11 | Characterization of SiC nanowires grown by APCVD using single precursors | Rho, D.-H.; Kim, J.-S.; Byun, D.-J.; Yang, J.-W.; Lee, J.-H.; Kim, N.-R. |
| 2021-10 | Chemical constituents of the leaves of diospyros kaki (Persimmon) | Kwon, J.; Park, J.-E.; Lee, J.-S.; Lee, J.-H.; Hwang, H.; Jung, S.-H.; Kwon, H.-C.; Jang, D.-S. |
| 2007-12 | Comparison of the power generating characteristics of KIST- and FZ-julich SOFCs | Jung, H.Y.; Lee, S.C.; Tietz, F.; Kim, H.-R.; Lee, H.-W.; Lee, J.-H. |
| 2017-09 | Effect of processing method on platycodin D content in Platycodon grandiflorum roots | Kwon, Jaeyoung; Lee, H.; Kim, N.; Lee, J.-H.; Woo, M.H.; Kim, J.; Kim, Y.S.; Lee, D. |
| 2010-03 | Effects of Yb-Concentration on the Proton Conductivities of Low Temperature Sinterable Barium Zirconate Ceramics | Park, J.-S.; Lee, J.-H.; Lee, H.-W.; Kim, B.-K. |
| 2012-10 | Electrical characterization of ultrathin film electrolytes for micro-SOFCs | Shin, E.-C.; Ahn, P.-A.; Jo, J.-M.; Noh, H.-S.; Hwang, J.; Lee, J.-H.; Son, J.-W.; Lee, J.-S. |
| 2018-06 | Enhanced carbon tolerance of Ir alloyed Ni-Based metal for methane partial oxidation | Ahn, K.; Lee, J.-H.; Kim, H.; Kim, J. |
| 2008-12 | Fabrication and characterization of composite sealants for low temperature (600-650°C) SOFCs | Lim, H.-Y.; Kim, H.; Choi, S.-H.; Kim, H.-R.; Son, J.-W.; Lee, H.-W.; Lee, J.-H. |
| 2007-07 | Fabrication and structural analysis of an epitaixal Ni/Cu(001) nanostructure on a Si substrate | Lee, S. G.; Shin, S. W.; Lee, J.; Lee, J.-H.; Song, J. H.; Choi, J.-Y.; Lee, H. H.; Lee, H. S. |
| 2015-07 | Fabrication of large-area multi-scale-architectured thin-film SOFC via commercially viable thin-film technology | Noh, H.-S.; Hong, J.; Kim, H.; Yoon, K.J.; Kim, B.-K.; Lee, J.-H.; Son, J.-W. |
| 2007-10 | Fabrication of micro solid oxide fuel cell by thin film processing hybridization: I. Multilayer structure of sputtered YSZ thin film electrolyte and Ni-based anodes deposited by spray pyrolysis | Son, J.-W.; Kim, H.; Kim, H.-R.; Lee, J.-H.; Lee, H.-W.; Bieberle-H？tter, A.; Rupp, J.L.M.; M？ecke, U.P.; Beckel, D.; Gauckler, L.J. |
| 2015-09 | Fabrication of NiO-Y:BaZrO3 composite anode for thin film-protonic ceramic fuel cells using tape-casting | Bae, K.; Noh, H.-S.; Jang, D.Y.; Kim, M.; Kim, H.J.; Hong, J.; Lee, J.-H.; Kim, B.-K.; Son, J.-W.; Shim, J.H. |
| 2010-01 | Fabrication of thin solid oxide film fuel cells | Jee, Y.; Chang, I.; Son, J.-W.; Lee, J.-H.; Kang, S.; Cha, S.W. |
| 2005-11 | Growth and characterization of SiOx nanowires by VLS and SLS growth mechanism | Rho, D.-H.; Kim, J.-S.; Byun, D.-J.; Yang, J.-W.; Lee, J.-H.; Kim, N.-R. |
| 2015-07 | High performance air electrode for solid oxide regenerative fuel cells fabricated by infiltration of nano-catalysts | Yoon, K.J.; Hong, J.; Kim, H.; Son, J.-W.; Lee, J.-H.; Kim, B.-K. |
| 2009-11 | I-Grabber: Expanding physical reach in a large-display tabletop environment through the use of a virtual grabber | Abednego, M.; Lee, J.-H.; Moon, W.; Park, J.-H. |
| 2012-11 | Improved microstructural homogeneity of Ni-BCY cermets membrane via high-energy milling | Kim, H.; Ahn, K.; Kim, B.; Lee, J.; Chung, Y.-C.; Kim, H.-R.; Lee, J.-H. |
| 2015-07 | Influence of sintering additive on the electrical conductivity, chemical stability and sinterability of BaCe0.55Zr0.3Y0.15O3-δ | An, H.; Shin, D.W.; Choi, S.M.; Hong, J.; Yoon, K.J.; Son, J.-W.; Kim, B.-K.; Lee, J.-H. |
| 2007-12 | LSGM계 음극지지형 고체산화물 연료전지에 적용된 LDC 완충층의 효과 | Song, E.H.; Chung, T.-J.; Kim, H.-R.; Son, J.-W.; Kim, B.K.; Lee, J.-H.; Lee, H.-W. |
| 2021-12 | Magnetic field-based vehicle positioning system in long tunnel environment | Shin, B.; Lee, J.-H.; Yu, C.; Kyung, H.; Lee, T. |
| 2016-09 | Microscopic analysis of high lithium-ion conducting glass-ceramic sulfides | Park, M.; Jung, W.D.; Choi, S.; Son, K.; Jung, H.-G.; Kim, B.-K.; Lee, H.-W.; Lee, J.-H.; Kim, H. |
| 2010-01 | Microstructural characterization of composite electrode materials in solid oxide fuel cells via image processing analysis | Bae, S.-M.; Jung, H.-Y.; Lee, J.-H.; Hwang, J.-H. |
| 2008-04 | Microstructures and proton conductivities of BaZrO3 modified by BaCeO3 | Park, J.-S.; Lee, S.-M.; Kim, D.-W.; Lee, J.-H.; Lee, H.-W.; Choi, H.-J.; Kim, B.-K. |
| 1998-01 | New alicyclic polymers based on protected dinorbornene monomers for application as deep UV resists | Ahn, K.-D.; Rang, J.-H.; Lee, C.-W.; Kim, J.-M.; Han, D.-K.; Lee, J.-H.; Cho, I.; Moon, S.-Y.; Koo, J.-S.; Lee, S.-K. |
| 2000-06 | Norbornene-derived quinizarin dye molecules for photoimaging in polymer films based on chemical amplification | Ahn, K.-D.; Lee, J.-H.; Cho, I.; Park, K.H.; Kang, J.-H.; Han, D.K.; Kim, J.-M. |
| 1994-01 | Numerical simulation of fully developed flow and heat transfer characteristics in a curved tube with pulsating pressure gradient | Back, Y.-R.; Lee, J.-H.; Kang, B.-H.; Oh, M.-D. |
| 2011-12 | Performance of solid oxide fuel cell with gradient-structured thin-film cathode composed of pulsed-laser-deposited lanthanum strontium manganite-yttria-stabilized zirconia composite | Myung, D.-H.; Hong, J.; Hwang, J.; Lee, J.-H.; Lee, H.-W.; Kim, B.-K.; Cho, S.-G.; Son, J.-W. |
